Comments for logfile http://blog.schuster1.com all your base are belong to us! Mon, 20 Sep 2010 01:05:10 +0000 hourly 1 http://wordpress.org/?v=3.1.1 Comment on Use a Netgear TA612V behind a router using Sipgate (incl. working Cisco VPNClient) by JK http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/comment-page-1/#comment-10190 JK Mon, 20 Sep 2010 01:05:10 +0000 http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/#comment-10190 Wonderful, thank you - what a pleasure to find a helpful soul on the 'net who has grappled with the problem I was facing. My setup was similar: cable modem --> TA612V --> Safe@Office 500 firewall/router --> internal network switch. I needed to move the TA612V inside the firewall to allow the firewall to establish VPNs with other outside addresses. Following your instructions, with a couple of local variations, did the trick. Changes specific to my env't: Step 3: I had to attach the TA612V Ethernet socket direct to my PC to get at the admin web interface, and then I configured the LAN settings on the TA612V to use a specific 192.168.0.x internal address, and turned DHCP off. Step 4: also completed with the TA612V direct to the PC. Steps 6 & 7: Turned out to be unnecessary for me - once I connected the TA612V Internet port to one of the Ethernet ports on the inside of my firewall, VOIP was working straight away. Step 8: If you're running a switch/hub internally, you can connect the Ethernet port of the TA612V to a spare switch port, and the TA's web admin interface will then be available on the IP address assigned in Step 3 above. Once again, many thanks for posting such a helpful procedure, all the best. Wonderful, thank you – what a pleasure to find a helpful soul on the ‘net who has grappled with the problem I was facing. My setup was similar: cable modem –> TA612V –> Safe@Office 500 firewall/router –> internal network switch. I needed to move the TA612V inside the firewall to allow the firewall to establish VPNs with other outside addresses. Following your instructions, with a couple of local variations, did the trick.
Changes specific to my env’t:
Step 3: I had to attach the TA612V Ethernet socket direct to my PC to get at the admin web interface, and then I configured the LAN settings on the TA612V to use a specific 192.168.0.x internal address, and turned DHCP off.
Step 4: also completed with the TA612V direct to the PC.
Steps 6 & 7: Turned out to be unnecessary for me – once I connected the TA612V Internet port to one of the Ethernet ports on the inside of my firewall, VOIP was working straight away.
Step 8: If you’re running a switch/hub internally, you can connect the Ethernet port of the TA612V to a spare switch port, and the TA’s web admin interface will then be available on the IP address assigned in Step 3 above.
Once again, many thanks for posting such a helpful procedure, all the best.

]]> Comment on Ist es ein Vogel? Ist es ein Flugzeug? by georg http://blog.schuster1.com/2009/10/24/ist-es-ein-vogel-ist-es-ein-flugzeug/comment-page-1/#comment-8330 georg Thu, 05 Nov 2009 16:42:56 +0000 http://blog.schuster1.com/?p=112#comment-8330 Und die 10 Bonuspunkte für das Finden der Filmreferenz gehen an... <TROMMELWIRBEL> ...Felix! Und die 10 Bonuspunkte für das Finden der Filmreferenz gehen an… <TROMMELWIRBEL> …Felix!

]]> Comment on Ist es ein Vogel? Ist es ein Flugzeug? by Felix http://blog.schuster1.com/2009/10/24/ist-es-ein-vogel-ist-es-ein-flugzeug/comment-page-1/#comment-8329 Felix Thu, 05 Nov 2009 08:35:18 +0000 http://blog.schuster1.com/?p=112#comment-8329 Schade, ich hatte schon gehofft, du hättest 'nen Interocitor auf dem Photo versteckt :) Schade, ich hatte schon gehofft, du hättest ‘nen Interocitor auf dem Photo versteckt :)

]]> Comment on Ist es ein Vogel? Ist es ein Flugzeug? by Achim http://blog.schuster1.com/2009/10/24/ist-es-ein-vogel-ist-es-ein-flugzeug/comment-page-1/#comment-8321 Achim Wed, 28 Oct 2009 00:30:27 +0000 http://blog.schuster1.com/?p=112#comment-8321 Ok, ist nur die Frage warum du ein extra Notebook zum Zeigen beim Kunden brauchst, wenn du eh 2 Notebooks hast. Macht ja nur mehr arbeit das da drauf zu tun. Egal. hatten die in dem masse nicht, weil strom für laptops vom monitor aus neuer sind. So wie's aussieht lassen sich die neuen 27er imacs als monitore benutzen und ne 2560x1400 auflösung ist besser als 1920x1200. weil letztere haut mich nicht mehr um ehrlich gesagt Ok, ist nur die Frage warum du ein extra Notebook zum Zeigen beim Kunden brauchst, wenn du eh 2 Notebooks hast. Macht ja nur mehr arbeit das da drauf zu tun. Egal.

hatten die in dem masse nicht, weil strom für laptops vom monitor aus neuer sind. So wie’s aussieht lassen sich die neuen 27er imacs als monitore benutzen und ne 2560×1400 auflösung ist besser als 1920×1200. weil letztere haut mich nicht mehr um ehrlich gesagt

]]> Comment on Ist es ein Vogel? Ist es ein Flugzeug? by georg http://blog.schuster1.com/2009/10/24/ist-es-ein-vogel-ist-es-ein-flugzeug/comment-page-1/#comment-8232 georg Sun, 25 Oct 2009 16:28:18 +0000 http://blog.schuster1.com/?p=112#comment-8232 Das eine ist mein altes, das andere ist mein neues und das 13er (Pro) ist zum Demos-Zeigen beim Kunden. Sound und iSight hab ich beim 24er ehrlich gesagt noch nie benutzt, aber auflösungstechnisch macht das Teil echt Spaß. Was mir daran am besten gefällt ist, dass vom Monitor ein einziges Kabel weggeht, das sich am Ende in Strom- USB- und Monitoranschlußkabel aufteilt. Hatten die bestimmt auch vorher schon alle, aber ich find's echt stark. Das eine ist mein altes, das andere ist mein neues und das 13er (Pro) ist zum Demos-Zeigen beim Kunden.
Sound und iSight hab ich beim 24er ehrlich gesagt noch nie benutzt, aber auflösungstechnisch macht das Teil echt Spaß. Was mir daran am besten gefällt ist, dass vom Monitor ein einziges Kabel weggeht, das sich am Ende in Strom- USB- und Monitoranschlußkabel aufteilt. Hatten die bestimmt auch vorher schon alle, aber ich find’s echt stark.

]]> Comment on Ist es ein Vogel? Ist es ein Flugzeug? by Achim http://blog.schuster1.com/2009/10/24/ist-es-ein-vogel-ist-es-ein-flugzeug/comment-page-1/#comment-8231 Achim Sun, 25 Oct 2009 13:04:50 +0000 http://blog.schuster1.com/?p=112#comment-8231 Angeber man ist gut.... wieso brauchst du so viele Macs die im Endeffekt alle gleich sind? Und: ist das 13er in Pro oder nur MB? Wie ist denn das 24er Display mit Sound und iSight etc? Angeber man ist gut…. wieso brauchst du so viele Macs die im Endeffekt alle gleich sind?

Und: ist das 13er in Pro oder nur MB? Wie ist denn das 24er Display mit Sound und iSight etc?

]]> Comment on Use a Netgear TA612V behind a router using Sipgate (incl. working Cisco VPNClient) by georg http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/comment-page-1/#comment-4141 georg Sun, 08 Jun 2008 20:23:15 +0000 http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/#comment-4141 Hi Sunny. I don't exactly understand your question. What do you mean by "I have a modem router, DSL-504T instead of connecting the modem to the router". If you mean that your DSL-Modem and router is one and the same device (which I assume), then you can follow this guide, obviously skipping parts one and two. I'm sorry that I won't send you detailed instructions on how to setup your port forwarding via e-mail. Instead I hope you know someone to assist you there. You can find more (general) infos about port-forwarding for your DSL-504T for example here: http://portforward.com/english/routers/port_forwarding/Dlink/DSL-504T/ICUII.htm Step 7 should allow your TA612V to receive automatic updates from Sipgate. But (as you can read in he text) I have never tried to investigate that behaviour because I didn't need the auto-update function. Just try to forward these two ports to your TA612V. Perhaps you can report sometimes if the auto-updates work then. I hope that I could help you at least a little bit. Hi Sunny.
I don’t exactly understand your question. What do you mean by “I have a modem router, DSL-504T instead of connecting the modem to the router”. If you mean that your DSL-Modem and router is one and the same device (which I assume), then you can follow this guide, obviously skipping parts one and two.
I’m sorry that I won’t send you detailed instructions on how to setup your port forwarding via e-mail. Instead I hope you know someone to assist you there. You can find more (general) infos about port-forwarding for your DSL-504T for example here: http://portforward.com/english/routers/port_forwarding/Dlink/DSL-504T/ICUII.htm
Step 7 should allow your TA612V to receive automatic updates from Sipgate. But (as you can read in he text) I have never tried to investigate that behaviour because I didn’t need the auto-update function. Just try to forward these two ports to your TA612V. Perhaps you can report sometimes if the auto-updates work then.

I hope that I could help you at least a little bit.

]]> Comment on Use a Netgear TA612V behind a router using Sipgate (incl. working Cisco VPNClient) by Sunny http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/comment-page-1/#comment-4139 Sunny Sun, 08 Jun 2008 01:52:12 +0000 http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/#comment-4139 Hi, I have a question. I have a modem router, DSL-504T instead of connecting the modem to the router. Does it matter? In addition, I don't understand what I need to do in Step 6 and Step 7. Could you write more specifically about them by email to me? Thank you! B.regards, Sunny Hi, I have a question. I have a modem router, DSL-504T instead of connecting the modem to the router. Does it matter? In addition, I don’t understand what I need to do in Step 6 and Step 7. Could you write more specifically about them by email to me? Thank you!

B.regards,
Sunny

]]> Comment on Use a Netgear TA612V behind a router using Sipgate (incl. working Cisco VPNClient) by Michelle http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/comment-page-1/#comment-3897 Michelle Mon, 17 Mar 2008 00:25:16 +0000 http://blog.schuster1.com/2007/09/20/use-a-netgear-ta612v-behind-a-router-using-sipgate-incl-working-cisco-vpnclient/#comment-3897 WOW this worked first time!!!! Thank you so much for posting your article on using a Netgear TA612V behind a router, I've been trying unsuccessfully for weeks to get a home network running between two computers but one being behind the TA612V was preventing this. Now I have internet access on both pc's, my phone works and I can share files and printers! I really cannot thank you enough. Kindest regards from the UK, Michelle x WOW this worked first time!!!!
Thank you so much for posting your article on using a Netgear TA612V behind a router, I’ve been trying unsuccessfully for weeks to get a home network running between two computers but one being behind the TA612V was preventing this. Now I have internet access on both pc’s, my phone works and I can share files and printers! I really cannot thank you enough.
Kindest regards from the UK, Michelle x

]]> Comment on Masters Of The Universe by Achim http://blog.schuster1.com/2008/01/23/masters-of-the-universe/comment-page-1/#comment-3692 Achim Wed, 23 Jan 2008 11:30:13 +0000 http://blog.schuster1.com/2008/01/23/masters-of-the-universe/#comment-3692 Glückwunsch Georg! Gut gemacht Glückwunsch Georg!
Gut gemacht

]]>